Made of 8¼" X 8¼" die formed 13-gauge top support welded to four 1¹/₈" 18-gauge carbon steel tubes equipped with 18-gauge, full tube, chrome plated leg inserts, tapped at 1" levels for Phillips locking adjustment bolts with an additional ¹/₈" adjustment for uneven floors. Upper legs reinforced with a ¾" 18-gauge diameter foot rest welded to the outside of each leg. Solid plastic chairs are assembled with tamper resistant screws.

13" diameter. Attached with 4 #10 x ⁷/₁₆" screws.

Powder coat epoxy over Iron phosphate coating or nickel chrome plating.

1¼" diameter platform style, have a raised-radius inner-dome to ensure glide alignment. The use of a ferrule or collar on the glide is unacceptable. The glide is rubber cushioned, 1¼" diameter, self-leveling and fully nickel plated. The attachment incorporates an inside gripper ring, which positively secures the glide to the inside of the leg. The glide base is nylon.

0056 adjusts 19½" to 28". 0057 adjusts 23½" to 32½"